Transform Your Outdoor Space with The EverDeck Kit
Give your decks and patios a stunning makeover with the EverDeck Kit. Each kit covers 120 to 200 sq. ft. and includes Primer, Resin, Paint, Clear Coat, Aggregate, and a mixing bucket. Protect against dirt, stains, and UV rays while achieving a polished finish.
The EverDeck Kit Pricing Starts As Low As $2 / Sq Ft.
The EverDeck Kit Includes:
» 1 Gallon Primer
» 1 Gallon Resin
» 1 Gallon of Paint
» 1 Bag of Aggregate
» ½ Gallon UV Clear Coat
» 5 Gallon bucket for mixing
To Order Call: 573-544-4711
The EverDeck Kit consists of one gallon of Primer, one gallon of Resin, one gallon of paint, one half-gallon clear coat, and one 12 lb. bag of Aggregate. A 5 gallon bucket will be included for mixing product.
Example: if you have a deck that is 300 sq. ft. and the wood is in fair condition you will get approximately 150 sq. ft. of coverage and therefore you will need 2 Kits. Make sure to contact us for any questions!
The coverage for a Kit will range from 120 to 200 sq. ft. The amount of coverage depends on the condition of the surface to be treated. This product can be applied to wood or concrete surfaces (as long as there is no vehicle traffic). Coverage on concrete pool decks or patios averages close to 200 sq. ft. Coverage on wood decks averages from 150 to 180 sq. ft. Coverage on boat docks averages from 80 to 150 sq. ft.
EverDeck Clear UV Coating is a top coat sealer designed to add an additional hardener, help repel dirt and stains, and protect from UV rays. It is a clear liquid that is to be applied with a 3/16 to 1/4 inch nap roller. A very thin layer is desired. One quart will cover 150 square feet. Apply this last, after the final coat of EverDeck Coating has dried enough to walk on.
Example: if you have a deck that is 300 sq. ft. and the wood is in fair condition you will get approximately 150 sq. ft. of coverage and therefore you will need 2 Kits.
Please note some shades may differ due to your electronic screen. We can provide complimentary color swatches.
Don’t see a color you like? Contact us about Custom Color Options.
For all applications, please power wash and make sure wood or concrete is dry. We recommend less than 15% moisture content.
Wood Application Instructions
- Apply primer to clean, dry wood with roller and let set (usually 10-15 minutes).
- In a 5 gallon bucket mix the 1 gallon of coating with 1 gallon of resin, then mix with a highspeed paddle mixer for 30 seconds.
- Add bag of aggregate at a moderately slow rate while continuing to mix. After all aggregate is added continue mixing for approximately 1-2 minutes. Make sure that all white particles are mixed in including the sides of the bucket. The mix should be nice, thin and easy to apply. Please note that you will need to mix multiple times during application. If you don't the coating can get clumpy and uneven.
- When ready to apply, use 3/4 in. nap roller cover and if cutting in is required use brushes. (Roller nap needed varies depending on condition of wood). Make sure all cracks and voids are filled with roller or brush on first coat.
- After first coat is dry to touch, apply second coat using same method. (Coverage should be greater on the second coat).
- Lastly, apply one thin layer of Clear UV Coating with 3/8 in. nap roller.
- The curing time should be 2-3 days. Keep furniture, pets, plants, etc off until completely cured.
Concrete Application
- Apply primer to clean, dry concrete area. Let set until dry to the touch.
- In a 5 gallon bucket mix the 1 gallon of coating with 1 gallon of resin, then mix with a highspeed paddle mixer for 30 seconds.
- Add bag of aggregate at a moderately slow rate while continuing to mix. After all aggregate is added continue mixing for approximately 1-2 minutes. Make sure that all white particles are mixed in including the sides of the bucket. The mix should be nice, thin and easy to apply. Please note that you will need to mix multiple times during application. If you don't the coating can get clumpy and uneven.
- When ready to apply use 1/2 in. nap roller.
- After first coat is dry to touch, apply second coat using same method. (Coverage should be greater on the second coat).
- Lastly, apply one thin layer of Clear UV Coating with 3/8 in. nap roller.
- The curing time should be 2-3 days. Keep furniture, pets, plants, etc. off until fully cured.
- Optimal temps for applying to concrete or wood are 50-80 degrees Fahrenheit.
Please call 573-544-4711 for any assistance.
What can EverDeck be used on?
Decks, docks, fences, concrete patios, pool decks, walkways, pergolas, and playground equipment.
What can it coat over?
Any old paint or stains. If it is an oil based paint and has a sheen, you may need to lightly sand it for adhesion. We can coat new decks when dry and the moisture is below 15%. We also can coat over existing composite decks that are eroding and losing finish.
What can I use to clean it once applied?
Try to find a deck cleaning products that contain oxalic acid, which won't hurt the paint.
Do I have to use aggregate on railings and vertical steps?
No you do not need to use aggregate for those applications. If you want you can also use half of the aggregate if you do not want as much slip resistance. But aggregate is necessary for foot traffic surfaces.
Can I use this on driveways or in my garage?
No. EverDeck can only be used on foot traffic areas.
Will I lose my wood grain finish?
No. EverDeck still shows the grain finish compared to other paints and coatings. The deck looks more like composite wood than a paint.
Contact Us to Order
The Everdeck Kit
To order your EverDeck Kit and discuss your project details, please contact us. Our team is ready to help you find the ideal solution for your specific requirements. Thank you for choosing EverDeck Coatings—we're excited to work with you and deliver outstanding results!